Foxconn Bloodrage User Manual page 106

6. Use Up or Down arrow key to select the desired strip size when entering "strip
Size" menu. The default value is 64K. Press <Enter>.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, use the default value, and press <Enter>. The default value is
twice that of the smallest hard disk size, that is, 232.9GB * 2 = 465.8GB.
8. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID5
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
The following are typical values:
[↑↓]-Change [TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
[ DISK/VOLUME INFORMATION
Level
RAID5(Parity)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select
]
TryRAID5
RAID5(Parity)
Select Disks
64KB 64KB
465.8 GB
Create Volume
[ HELP ]
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
[ESC]-Previous Menu
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
]
Stripe Size
64KB 465.8GB
Size
232.9GB
298.1GB
279.5GB
[ESC]-Exit [ENTER]-Select Menu
99
[ENTER]-Select
Status Bootable
Normal Yes
Type/Status(Vol ID)
Non-RAID Disk
Member Disk(0)
Member Disk(0)
Member Disk(0)