Foxconn Bloodrage User Manual page 32

BIos select Jumper: BIos_seleCT
The jumper is used to select the booting from BIOS ROM 1 or BIOS ROM 2. You can refer to the
following table for the setting.
1 2
7 8
BIOS_SELECT
Definition
1-2
3-4
5-6
(default)
7-8
Button_en Jumper: BUTToN_eN
The jumper is used to set whether to enable Clear_CMOS button on the back panel. The recom-
mended setting is "Disable" to prevent CMOS resetting by touching the button on the IO panel
accidentally.
Enable
Disable
BUTTON_EN
BIOS ROM 2
Description
Set Pin 1 and Pin 2 closed
Set Pin 3 and Pin 4 closed
Set Pin 5 and Pin 6 closed
Set Pin 7 and Pin 8 closed
1
2
3
1
2
3
BIOS ROM 1
Function
Force BIOS ROM 1
Force BIOS ROM 2
BIOS select, default is
BIOS ROM 1
BIOS select, default is
BIOS ROM 2
25