Illustration Of The Optional Accessory - Foxconn Bloodrage User Manual

2-5 Illustration of the optional Accessory

1. Thermal Peripheral Bag
The Foxconn QuantumForce BloodRage is equipped with the second generation 4in1 Heatsink
which features much improved aircooling, a full size copper waterblock, and full modularity with
a copper base plate with support for third party and custom made cooling solutions. The copper
base plate is connected to the CPU PWM and Southbridge via Copper Heatpipes which means
improved Northbridge cooling will result lower CPU PWM and Southbridge temperatures as well.
<1>. Fan Clip and NB Extra Fan
Note that the Heatsink can be removed and mounted in 2 orientations. Insert one metal clip on
one side of the Northbridge Heatsink, then lay the bundled fan onto the Heatsink in the desired
orientation (push or pull) and pull the metal clip up to slide the fan under it. Note that the metal
clip will become more flexible after bending it up several times. Once the first clip is fastened,
move the fan slightly down on the other side of the heatsink so you can push in the second clip.
Then lift the second clip up and push the fan into the right position.
<2>. Waterblock ring
To secure watercooling tubes to the Waterblock. See "waterblock" for further details.
<3>. Thermal Grease
Use this thermal grease when changing the Northbridge Heatsink.
<4>. Passive Heatsink
Please note that you can install these Heatsinks at your own risk and doing so might void your
warranty! They may fall off and short the Motherboard or other components if not mounted prop-
erly or if the case is moved around. We recommend using the Heatsinks only in flat horizontal
21