Bios Configuration; Create Raid In Bios - Foxconn Bloodrage User Manual

5-2 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the "Integrated Peripherals" from the "Main menu", then select the
IDE Device" item and press <Enter> to go to the configuration items.
3. Select and Set the "SATA Mode" option to [RAID].
4. Press <F10> to save the setting then PC will reboot itself.
SATA Mode
Legacy Mode Support
x Turbo Memory Support
OnBoard IDE and eSATA Chip
OnBoard SAS Chip
↑↓→←:Move Enter:Select

5-3 Create RAID in BIos

enter RAID BIos setup
When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
+/-/PU/PD:Value F10:Save
F5:Previous Values
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
[ DISK/VOLUME INFORMATION
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select
RAID RAID
Disabled
Disabled Menu Level ►
IDE Mode
Enabled
ESC:Exit F1:General Help
F7:Optimized Defaults
Matrix Storage Manager Option ROM
®
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
]
Size
232.9GB
298.1GB
279.5GB
[ESC]-Exit [ENTER]-Select Menu
83
Item Help
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
"OnChip