Foxconn Bloodrage User Manual page 14

5. 1394a Port
This port is used to connect a 1394a device.
6. external sATA Port
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to the
chassis back panel. External SATA device shall provide power by its own.
7. RJ-45 lAN Port
Each Gigabit Ethernet LAN port provides Internet connection at up to 1Gb/s data rate.
Both Gigabit Ethernet LAN ports can be combined in teaming mode to support connection speeds
up to 2Gb/s!
Left: Active
LAN Type
Status
Off
1000M
Green
Blinking
8. Audio Ports (soNAR X-fi Card)
For the definition of each audio port, please refer to the table below :
Port 2-channel
Blue Line In
Green Line Out
Pink Microphone In
Orange -
Black -
Grey -
Note: The SONAR X-Fi card is in the package, you can connect it to the back panel.
Description Status
No Link Off
Off
Data
Green
Activity
Orange
4-channel
Line In
Front Speaker Out
Microphone In
-
Rear Speaker Out
-
Right: Link
Description
No Link
10 Mb/s Connection
100 Mb/s Connection
1000 Mb/s Connection
5.1-channel
Line In
Front Speaker Out
Microphone In
Center/Subwoofer Out
Rear Speaker Out
-
7
Link
Active
LED
LED
7.1-channel
Line In
Front Speaker Out
Microphone In
Center/Subwoofer Out
Rear Speaker Out
Side Speaker Out