Pnp/Pci Configurations - Foxconn WinFast 6150K8M Series User Manual

PnP/PCI Configurations

vInit Display First
This item is used to set which display device will be used first when your PC
starts up.
vReset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/0 addresses when each time the machine is turned
on.
vResources Controlled By
This option is used to define the system resource control scheme.If all cards
you use support PnP, then select Auto(ESCD) and the BIOS will automatically
distribute interruption resources.If the ISA cards you installed not supporting
PnP, You will need to select "Manual" and manually adjust interruptiesources
in the event of hardware conflicts. However, since this motherboard has no
ISA slot, this option does not apply.
vIRQ Resources
Press the <Enter> key, then manually set IRQ resources.
vPCI/VGA Palette Snoop
If you use a nonstandard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
vMaximum Playload Size
This item is used to set maximum payload size for PCI Express device.The
unit is byte.
46
PnP/PCI Configurations Menu
Chapter 3 BIOS Description