Reset Disks To Non-Raid - Foxconn Bloodrage User Manual

Reset Disks to Non-RAID

Reset RAID volume allows you to replace a failed disk with a new one, and the
operating system will rebuild the data later. For RAID0, reset a hard disk would totally
crash the system, but for RAID1, RAID10 and RAID5, they all can be rebuilt.
When rebuild is needed, you must first install a new hard disk in your system before
getting into Intel Matrix Storage Manager utility, because the utility will ask you which
®
hard disk the new rebuild will be performed.
example 1. Reset a RAID0 system.
1. A TryRAID0 volume was built with two 232.9GB hard disks, we want to reset one of
them. Select "3. Reset Disks to Non-RAID" in main menu and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID0
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
2. A warning message is displayed.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
3. Delete RAID Volume
RAID Volume :
ID Name
Port Drive Model
0 TryRAID0
0
0
2
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ DISK/VOLUME INFORMATION
Level
RAID0(Stripe)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select [ESC]-Exit
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
[ DISK/VOLUME INFORMATION
WARNING: Resetting a disk causes all data on the disk to be lost.
Level
Serial #
RAID0(Stripe)
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
Maxtor 6L250S0 L50SKP4G
Serial #
L50SKP4G
9QF4YJGQ
Select the disks that should be reset
3NF02XH2
[↑↓]-Previous/Next [SPACE]-Selects
[↑↓]-Select [ESC]-Exit
[ MAIN MENU ]
3. Reset Disks to Non-RAID
3. Reset Disks to Non-RAID
4. Exit
]
Stripe Size Status
128KB 465.8GB Normal
Size Type/Status(Vol ID)
Member Disk(0)
232.9GB Member Disk(0)
298.1GB Non-RAID Disk
279.5GB Non-RAID Disk
[ENTER]-Select Menu
[ MAIN MENU ]
3. Reset Disks to Non-RAID
RESET RAID DATA ]
4. Exit
]
Stripe Size Status
Size
128KB 465.8GB Normal
232.9GB
Size Type/Status(Vol ID)
Non-RAID Disk
232.9GB Non-RAID Disk
298.1GB Non-RAID Disk
279.5GB Non-RAID Disk
[ENTER]-Selection Complete
[ENTER]-Select Menu
102
Bootable
Yes
* = Data is Encrypted
Bootable
Status
Yes
Member Disk
Member Disk
Member Disk