Reset Disks To Non-Raid - Foxconn Rattler User Manual

Reset Disks to Non-RAID

Reset RAID volume allows you to replace a failed disk with a new one, and the
operating system will rebuild the data later. For RAID0, reset a hard disk would totally
crash the system, but for RAID1, RAID10 and RAID5, they all can be rebuilt.
When rebuild is needed, you must first install a new hard disk in your system before
getting into Intel Matrix Storage Manager utility, because the utility will ask you which
®
hard disk the new rebuild will be performed.
example 1. Reset a RAID0 system.
1. A TryRAID0 volume was built with two 149.0GB hard disks, we want to reset one of
them. Select "3. Reset Disks to Non-RAID" in main menu and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID0
Physical Disks:
Port Drive Model
0 Hitachi HDS72161
1 ST380811AS
2 SAMSUNG HD161HJ S0V3J9APA30524
3 ST380815AS
2. A warning message is displayed.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volume :
Port Drive Model
ID Name
0
0
0 TryRAID0
2
0 Hitachi HDS72161
1 ST380811AS
2 SAMSUNG HD161HJ S0V3J9APA30524
3 ST380815AS
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ DISK/VOLUME INFORMATION
Level
RAID0(Stripe)
Serial #
PVF904Z21G2JZM
5PS1TAGW
5RW1CA37
[↑↓]-Select [ESC]-Exit
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
[ DISK/VOLUME INFORMATION
WARNING: Resetting a disk causes all data on the disk to be lost.
( This does not apply to Recovery volumes)
Serial #
Level
Hitachi HDS721616PLA PVF904Z21G2JZM
Hitachi HDS721616PLA PVF904Z21G2JZM
RAID0(Stripe)
SAMSUNG HD161HJ
PVF904Z21G2JZM
5PS1TAGW
5RW1CA37
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects
[↑↓]-Select [ESC]-Exit
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Recover Volume Options
5. Exit
]
Stripe Size
128KB 298.1GB
Size
149.0GB
74.5GB
149.0GB
74.5GB
[ENTER]-Select Menu
[ MAIN MENU ]
3. Reset Disks to Non-RAID
RESET RAID DATA ]
5. Acceleration Options
6. Exit
]
Size Status
Stripe Size
149.0GB Member Disk
149.0GB Member Disk
128KB 298.1GB
S0V3J9APA30524 149.0GB Member Disk
149.0GB
74.5GB
149.0GB
74.5GB
[ENTER]-Selection Complete
[ENTER]-Select Menu
88
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Non-RAID Disk
Member Disk(0)
Non-RAID Disk
Status Bootable
Normal Yes
Member Disk(0)
Non-RAID Disk
Member Disk(0)
Non-RAID Disk