Print Capture Tab (Main Window) - Multitech FaxFinder FF130 Administrator User Manual

Chapter 5: FaxFinder Operation
Delete
Selecting this will delete the FaxFinder unit from use by this software. There is a delete confirmation
window that will pop-up prior to actual deletion.
Set as Default
Selecting set as default will make the unit clicked the default unit for sending faxes through this
software.
Properties
Selecting properties will bring up a window showing the FaxFinder unit type (FFx20 or FFx30), the IP
address the unit is using and your user name and password. The password is replaced by asterisks for
security.

Print Capture Tab (Main Window)

Any potential faxes sent from the print to FaxFinder option will be here, ready for additions, setting
changes or scheduling. There are two columns to this field: Document (the name of the document ready
to be scheduled) and Pages (the total number of pages in the document). To access the options for
items in the print capture area, right-click on the document name.
Fax
Selecting this will open the Fax Scheduler window allowing you to change any parameters as needed
and schedule your fax for a specific time or send it immediately. The Fax Schedule screen is covered
earlier in this chapter.
Delete
Selecting this will permanently delete the document from the client software. Entries in the Print
Capture tab will remain until they are manually deleted using this command.
View
Selecting the view option will open the document (a TIFF file) with the program associated with its
extension type; if you chose to associate TIFF files with the TIFF Viewer during installation, that is the
program that will open the file.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide
85