Multitech FaxFinder FF130 Administrator User Manual page 120

Appendix C: Cover Pages
Inserting an Image
From the Scribus software, select Insert | Image Frame. In the upper right-hand corner, left-click and
hold the left mouse button down at a starting point. Now, drag the mouse to create a box that is the
estimated size of your graphic and release the mouse button. You do not have to worry about being
exact as we can easily alter the size of the image frame when we are done. Now right-click inside the
created area and select Get Image.
Browse to the folder containing your company logo graphic, select it and click Open.
Now it is likely that the image does not fit into the area we created (in fact, you may not see your
graphic in the frame at all). Right-click in the image frame once again, and this time select Adjust Frame
to Image.
Now you have the image with the frame tight around it. If necessary, you may now move the frame to
its final location.
Inserting Static Text (Text Frame)
Now we want to enter the text that will be the same on ever fax – this uses Text Frames. Again starting
with the top-most static text, we will insert a text frame. You can use the Insert Text Frame icon (shown
below) from the toolbar or use Insert | Text Frame from the menu list.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide
120