Smtp - Multitech FaxFinder FF130 Administrator User Manual

Chapter 3: FaxFinder Web Management Interface

SMTP

The SMTP section contains the information needed to setup email usage with the FaxFinder, as well as a
way to test the setup by sending an email.
SMTP Configuration
SMTP Server Address
Enter the IP address of your simple mail transfer protocol server here. This can be either an IP address or
Hostname. This is where emails will be sent.
SMTP Port
Enter the SMTP port to be used here (the default value for SMTP is 25).
SMTP Username
If your SMTP server requires authentication, enter the username that the FaxFinder unit will use for
validation on the email server.
SMTP Password
If necessary for authentication, enter the password associated with the above username.
Confirm SMTP Password
Re-enter the password in order to avoid possible errors in the password previously entered.
FaxFinder Email Address
If you would like the FaxFinder unit to have a different 'From' email address, enter the change here.
Save button
When you have entered your information, be sure to click the save button before navigating away from
this page, else your changes will be lost.
Send a Test Email
Send Test Email To Address
Enter an email address here that you would like to send a test email to for verification that the settings
entered are correct and then click the 'Send Test Email' link.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide
30