Multitech FaxFinder FF130 Administrator User Manual page 43

Modem Configuration Table
Modem
This displays the number associated with the internal modems.
Fax ID
This displays the name associated with the individual modems.
Country Code
This display the country code that the modem is set to (in 2 character format).
Answer On
This will display the number of rings that the individual modem is set to answer after.
Max DTMF Digits
This displays the maximum number of DTMF digits allowed.
Routing
This shows the routing method employed by the modem.
Fax Direction
This will show what fax types are allowed (inbound, outbound, both).
Routing Definition
This displays any routing definitions as defined above.
Fax Direction
This lists the fax direction setting for the modem (inbound, outbound, both).
Error Correction
This will display is error correction is set to the modem.
Max Baud Rate
This will display the maximum baud (connection) rate allowed for this modem.
Smart Dial
This will show if Smart Dial is enabled.
Dial Prefix
This will display the dial prefix set (if any).
Tone Dial
This will show if Tone dialing has been selected.
Init String
This should only be used when directed to by Multi-Tech Support.
Fax Debugging
This will show as "On" when Fax Debugging is activated in the Modem Configuration section
above.
Multi-Tech Systems, Inc.
Chapter 3: FaxFinder Web Management Interface
FaxFinder Admin User Guide
43