Multitech FaxFinder FF130 Administrator User Manual page 33

Add Printer
The Add Printer and the Edit Printer screens are identical, the only difference being that the Edit Printer
screen will already contain information previously entered.
Printer Make
Select the manufacturer of the printer you are adding from the drop-down list. If you do not see
the manufacturer (make) of your printer, you can use the Generic selection.
Printer Model
Select the model of the printer you are adding from the provided list. If you selected Generic
above, the selections here will be generic as well.
Printer Name
Enter a name to associate with this printer that users will understand.
Description
Enter a description of the printer you are adding. It is often useful to put the location of the
printer here; e.g. "East end printer."
Device URI
Enter the Uniform Resource Identifier for this printer. Similar to a website URL, the URI identifies
the location of a printer on the network. There is a Help link that shows valid URI syntax; e.g.
socket://192.168.2.250
Advanced Setup
Advanced Setup
This will bring up the Common UNIX Printing System (CUPS) page. This page is provided for
advanced printing configuration and job control.
Note: This page is provided using the GNU General Public License software agreement. A copy of
the GNU GPL can be found on the product CD and in the back of this manual.
Save button
When you have entered your information, be sure to click the save button before navigating away from
this page, else your changes will be lost.
Cancel button
Clicking on the cancel button will cause you to lose all information entered and return you to the
previous screen.
Multi-Tech Systems, Inc.
http://hostname:631/ipp/port1
or
FaxFinder Admin User Guide
Chapter 3: FaxFinder Web Management Interface
.
33