The imager keeps a copy of the menu settings it is using. Whenever the imager
is connected or reconnected to a base, the imager is updated with the latest
settings from the base for its work group. The imager also receives menu setting
changes processed by the base. If an imager is removed from one base and
placed into another base, it will be updated with the new base settings for
whatever work group that the imager was previously assigned. For example, if
the imager was in work group 1 linked to the first base, it will be placed in work
group 1 in the second base with the associated settings.
Application Work Group Selection
This programming selection allows you to assign an imager to a work group by
scanning the bar code below. You may then program the settings (e.g., beeper
volume, prefix/suffix, data formatter) that your application requires.
* Group 0
Group 2
Group 4
Group 6
3 - 10
Group 1
Group 3
Group 5
2020/4820/4820i User's Guide