Table of Contents
Advertisement
Control + ASCII Mode On: The imager sends key combinations for ASCII
control characters for values 00-1F. Refer to
Relationships, page 10-1 for CTRL+ ASCII Values. Default = Off
Control + ASCII Mode On
Turbo Mode: The imager sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode. Default = Off
Turbo Mode On
Numeric Keypad Mode: Sends numeric characters as if entered from a
numeric keypad. Default = Off
Numeric Keypad Mode On
Automatic Direct Connect Mode: This selection can be used if you have an
IBM AT style terminal and the system is dropping characters. Default = Off
Automatic Direct
Connect Mode On
2 - 14
Keyboard Function
* Control + ASCII Mode Off
* Turbo Mode Off
* Numeric Keypad Mode Off
* Automatic Direct Connect
Mode Off
2020/4820/4820i User's Guide
Advertisement
Table of Contents
