Code 39 Code Page; Interleaved 2 Of 5 - Hand Held Products 4820 User Manual

Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.
Full ASCII On
* Full ASCII Off

Code 39 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see Code Page Mapping
of Printed Bar Codes on page A-6), and scan the value and the Save bar code
from the Programming Chart on the inside the back cover of this manual. The
data characters should then appear properly.
Code 39 Code Page

Interleaved 2 of 5

< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
* On
Off
2020/4820/4820i User's Guide 7 - 9