Table of Contents
Advertisement
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Code Page Mapping
of Printed Bar Codes
on page A-6), and scan the value and the Save bar code
from the
Programming Chart
on the inside the back cover of this manual. The
data characters should then appear properly.
Code 93 Code Page
Straight 2 of 5 Industrial (three-bar start/stop)
<Default All Straight 2 of 5 Industrial Settings>
Straight 2 of 5 Industrial
On
* Off
7 - 12
2020/4820/4820i User's Guide
Advertisement
Table of Contents
