11
Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the Symbology Chart, included in the
Appendix
A, page A-1) for the single character code that identifies each symbology.) This
action first clears all current prefixes, then programs a Code I.D. prefix for all
symbologies. This is a temporary setting that will be removed when the unit is
power cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Decoder Revision
Scan the bar code below to output the decoder revision.
Show Decoder Revision
Show Engine Revision
Scan the bar code below to output the engine revision. It will return the engine
type, revision number, and status character [ACK]. For example, an imager with
a 5100 engine, version 26 would return:
ENGREVType:
1
Revision: 26[ACK]
Show Engine Revision
Show Scan Driver Revision
Scan the bar code below to output the scan driver revision. The scan driver
controls image capture.
Show Scan Driver Revision
2020/4820/4820i User's Guide
11 - 1