Table of Contents
Advertisement
Cordless System: Main Components
About the Battery
Use only the Li-ion battery packs provided by Hand Held Products. The
use of any battery pack not sold by Hand Held Products will void your
!
warranty and may result in damage to your unit.
Power is supplied to the cordless imager by a rechargeable battery that is
integrated in the imager handle. Each imager is shipped with a battery. (See
Product Specifications
Charging Information
The battery is designed to charge while the imager is positioned in the cordless
base unit. Refer to
interpretation of the Charge Status indicators.
• Place the imager in the base that is connected to an appropriate power
supply.
Battery Recommendations
• Batteries are shipped approximately 30% to 60% charged and should be fully
charged for maximum charge capacity.
1 - 2
Imager
beginning on page 13-1 .)
"2020 LED Sequences and Meaning"
Battery Contained
in Handle
2020
Cordless Base
on page 3-4 for an
2020/4820/4820i User's Guide
Advertisement
Table of Contents
