Using A Printer; Print Your Work - Hand Held Products Quick Check 200 Series User Manual

Using a printer

The Quick Check supports three different Hand Held Products serial printers:
• Quick Check Printer (QCP)
• Quick Check High Speed Printer (QCHSP)
• Quick Check Super Speed Printer (QCSSP)
The QC and QCHSP are both impact printers. The QCSSP is a thermal printer
with high quality output.
When you first receive your printer, you should carefully unpack it. Before
attempting to use it, inspect the contents of the package for any shipping
damage. If there is evidence of damage, please keep ALL packing materials and
contact the delivery carrier as soon as possible for claim procedure.
Confirm that you have the following items:
• printer
• QCSSP, one roll of thermal paper
• QCP and QCHSP, one roll of paper
• QCSSP, AC power cord
QCP and QCHPS, Power Supply
For maximum printer performance, follow these general precautions for any type
of printer:
• Never place the printer where it is exposed to direct sunlight.
• Never apply power while you are plugging or unplugging an input
connector.
• Do not print without paper or a ribbon as this may damage the print head.
• Do not subject the printer to temperatures below 5°C or above 40°C
during operations, or to a sudden change in temperature.
• Insert the connectors so that a slight pressure seats the cable properly.
Never force the connectors as this could damage the cable.

Print your work

1. Connect your printer to the Quick Check and turn both units on.
2. Scan a bar code symbol.
3. Scan the appropriate special Print/Store Code. The Codes are located at the
back of this manual. There are four codes, one for each type of Quick Check
printer and one for a PC printer. The Quick Check sends your data to the
printer and begins printing.
44