Editing Spm Parameters - Motorola AP 73 User Manual

Special Programming Mode (SPM)

Editing SPM Parameters

Editing the Channel Scan List
In SPM, rotate the Selector Knob (2) to select the
Edit Channel Scan List (
Use or to scroll through the channels (01
to 20).
The channel scan list does not wrap around to the
opposite end of the list. Instead, an Invalid Button
Press tone sounds when you have reached the
upper or lower limit of the list.
A flashing channel number indicates that the chan-
nel is excluded from the scan list.
Press the Toggle Light / Enter and Parameter
Transfer Button (4) to toggle the status of a channel
i.e. being included or excluded from the scan list.
A Valid Button Press tone sounds when the new
setting is stored.
To exit this menu, select another menu item by
turning the Selector Knob (2).
Erase a Single Channel from Memory
In SPM, rotate the Selector Knob (2) to the Erase
Single Channel (
Use or to scroll through the channels (01
to 20).
48
) menu item.
NOTE
NOTE
NOTE
) menu.
2-Year Warranty