Editing Channel Parameters - Motorola GP2000 Service Manual

Programming Mode
RW
Description
Parameter
TELNO-X Telephone
Number
PL-XXXX PL/DPL
Display Type
SIT-XXXX Scan Interval
Time
SHT-XXXX Scan Hang
Time
4.6

Editing Channel Parameters

Channel parameters only affect the channel where the parameters are modiÞed. They become
effective after you press PTT or MON.
Channel
Description
Parameter
CH-XX Channel On/
Off
Default
Range from
Factory
16 charac- Blank
ters consist
of 1,2, É, 9,
0, A, B, C,
D, *, # and
Pause.
PL-CODE, PL-FREQ
PL-FREQ
SIT-0250, SIT-0500
SIT-0500,
ÉÉ,
SIT-5000
SHT-0500, SHT-7000
SHT-1000,
ÉÉ,
SHT-9500
Default
Range from
Factory
CH-OFF, CH-ON
CH-ON
Remarks
¥ Up to nine telephone numbers can be programmed.
¥ Once programmed into the memory, phone number
can be speed dialed by pressing PTT, + and then X,
where X denotes the telephone number location.
¥ Pause can be entered by pressing * followed by #.
¥ Enter # 16 times, to completely erase entered code.
¥ Refer to "4.10.5 Programming an Phone Number/
Access Code/De-access Code" on page 22 for
details.
¥ Select the display type of PL/DPL: FREQ and
CODE.
¥ If FREQ has been selected, then the PL and DPL
will be displayed in frequency and octal code format
respectively.
¥ If CODE has been selected, then the PL and DPL
will be displayed in Motorola code number format
(see "4.8 PL Frequencies and Codes" on page 18
and "4.9 DPL Codes" on page 19).
¥ Press + or - to select CODE or FREQ.
¥ Scan Interval Time is the duration the radio will
spend on the landed channel before switching to
scan the Priority Channel in Priority Scanning.
¥ Unit is in ms. Scan Interval Time is therefore pro-
grammable from 250ms to 5000ms in 250ms steps.
¥ Press + or - to select the desired Scan Interval
Time.
¥ Scan Hang Time is the duration the radio will stay
on the landed channel without detecting any activity
before it resumes scanning.
¥ Unit is in ms. Scan Hang Time is therefore pro-
grammable from 500ms to 9500ms in 500ms steps.
¥ Press + or - to select the desired Scan Hang Time.
Remarks
¥ Select if the channel is enabled (ON) or disabled
(OFF).
¥ Disabled channel will not be accessible in Normal
Mode.
¥ Press + or - to select ON or OFF.
4-11