Additional Operations - Motorola AP 73 User Manual

Additional Operations

Display Backlight
• Press the Toggle Light / Enter and Parameter
Transfer Button (4) to turn on / off the backlight.
To conserve power, the backlight is programmed to
automatically turn off after 5 seconds.
Pressing either the Push-To-Talk (PTT) Button (6)
or the Monitor Button (5) has no effect on the back-
light.
PTT ID
If programmed, the radio transmits a DTMF identifica-
tion code (unit ID), indicating which portable is in oper-
ation.
During a conversation, the code is normally sent only
on the initial PTT press (unless PTT ID has been dis-
abled). The 'TX' indicator lights for the duration of the
PTT ID. If there is no PTT or receive activity for 7 sec-
onds, or if you change the frequency or channel (or
scan resumes), the PTT ID is once again transmitted
on the next PTT press.
• Press and hold
Upon pressing , you will hear a beep. Hold the
button down until you hear a second beep, indicat-
ing that the PTT ID status has been changed.
When PTT ID is disabled , the "dot" indicator flashes
on the LCD Screen (18) .
2-Year Warranty
Additional Operations
NOTE
NOTE
to enable / disable PTT ID.
NOTE
17