Motorola AP 73 User Manual page 29

Table of Contents

Enlarged version

If you reach the upper ('15') or lower ('00') limit of

the squelch range, the squelch level does NOT

wrap around to the opposite limit but remains

where it is.

Selecting The Receive PL / DPL Squelch Code

Receive PL / DPL squelch code selection can only

be done in MHz mode.

There are 126 different Receive PL / DPL codes avail-

able, numbered from 001 to 126 (see "Receive And

Transmit PL / DPL Code Tables" on page 23).

Receive PL / DPL code '000' represents Carrier

squelch.

SQL

Press and hold

xxx represents the active Receive PL / DPL code

number).

Rotate the Selector Knob (2) to select the desired

active Receive PL / DPL code.

Press the Toggle Light / Enter and Parameter

Transfer Button (4) (or any other button) momen-

tarily to adopt this Receive PL / DPL code and

return to normal operating mode.

IMPORTANT

The radio automatically adopts the new Receive PL

/ DPL code and returns to normal operation after 5

seconds of inactivity.

2-Year Warranty

Additional Operations

NOTE

until

xxx is shown (where

Table of Contents