MHz Mode Operations
Selecting The TX Offset
For the AP 73, the transmit frequency can be the same
as the receive frequency (no offset), or having a stan-
dard positive or negative offset, or it can be a user-
defined TX frequency.
Press
momentarily to toggle between no off-
set, standard positive, negative offset, or user-
defined TX frequency (refer to the table below).
Indicator(s)
None
+
-
+ -
User-defined TX Frequency
Programming A User-Defined TX Frequency
Press and hold
to flash (takes about 3 seconds).
The LCD Screen (18) displays the current user-
defined TX frequency.
Enter the desired TX frequency via one of the fol-
lowing method:
(i) Through The Numeric Keypad (19)
Enter the desired TX frequency.
To fill in trailing zeros, press Toggle Light / Enter
and Parameter Transfer Button (4) .
28
Offset Mode
No offset (simplex)
Standard Positive Offset
Standard Negative Offset
until the "+ –" indicators begin
NOTE
NOTE
2-Year Warranty