Table of Contents
Advertisement
Special Programming Mode (SPM)
The LCD Screen (18) displays the current pro-
grammed PTT ID. For an PTT ID which exceeds the
6-digit display length, the rightmost digit flashes to
indicate that more digits exist on the right.
Enter the new PTT ID (up to 8 digits) using any of
the numeric keys, A, B, C, D,* and #.
The LCD Screen (18) shows the new digits as they
are being entered. When the cursor is flashing
under a digit, the maximum number has been
or
entered. Use
ing PTT ID and
to erase unwanted digits.
Pause digit (
between transmission of the digits programmed
before and after it. One or more pause digits can be
entered between successive digits of the phone
access / deaccess codes. When a pause digit is
successfully keyed, two beeps are heard; the dis-
play changes from 'A' to '-'. Pause digits placed at
the end of a phone number are not remembered by
the radio.
Press the Toggle Light / Enter and Parameter
Transfer Button (4) to store the new PTT ID and
return to SPM Browse Menu.
A Valid Button Press tone sounds when the new
setting is stored.
To abort data entry, select another menu item by
turning the Selector Knob (2) or wait until the edit
mode time-out (after 5 seconds of inactivity).
2-Year Warranty
NOTE
NOTE
to scroll through the exist-
NOTE
)causes the radio to wait in
NOTE
51
Advertisement
Table of Contents
