Motorola AP 73 User Manual page 21

Insert the radio / battery into the charging docket.
If using the Quick Charge Desktop Charger:
Press the Quick Charge button.
Refer to Table 1 and 2 on pages 10 and 11 for an
estimation of the duration involved for charging the
battery pack.
Remove the radio / battery from the charger when
charging is complete.
The LED on the charger lights up continuously dur-
ing charging. For the Standard Desktop Charger, it
is red for the whole charging period. For the Quick
Charge Desktop Charger, it changes from yellow
(before charging begins) to red (during charging) to
green (when charging is completed).
CAUTION
The Quick Charge Desktop charger runs on a 3-
hour timer which begins counting each time you
press the Quick Charge button . Removing the bat-
tery or radio from the charger before the battery is
fully charged, or removing and replacing battery /
radio repeatedly during charging, and then press-
ing the Quick Charge button again can overcharge
or damage the battery. Press the Quick Charge but-
ton only when the battery needs to be fully
charged.
2-Year Warranty
Getting Started
NOTE
13