Motorola AP 73 User Manual page 34

Table of Contents

Enlarged version

MHz Mode Operations

Rotate the Selector Knob (2) to the desired fre-

quency step size.

Momentarily press Toggle Light / Enter and Param-

eter Transfer Button (4) (or any button) to save this

frequency step size and return to normal opera-

tion.

IMPORTANT

The radio automatically save and return to normal

operation after about 5 seconds of inactivity.

The user-deﬁned TX frequency may be changed

automatically without indication depending on the

change in the frequency step size selected (see

"Selecting The TX Offset" on page 28).

Selecting A Receive Frequency

The various ways of selecting a receive frequency are

as follows:

(i) Through The Numeric Keypad (19)

In MHz mode:

• Enter the desired frequency

If the radio is left idle for more than 5 seconds, it will

revert back to the original frequency. When all the 6

digits are entered, the receiver will tune itself to that

frequency.

NOTE

2-Year Warranty

Table of Contents