Motorola AP 73 User Manual page 62

Special Programming Mode (SPM)
Selective Call alert tones give an audible indication of
receipt of a Voice Selective Call ( SelCall ). If disabled,
the alert tones do not sound when Voice Selective Call
messages are received by the radio.
Setting the Alert Tone Volume to off disables all
tones regardless of the setting of this parameter
(see "Setting the Alert Tone Volume" on
page 55).
In SPM, rotate the Selector Knob (2) to the Set
SelCall Tone Status (
Use or to toggle between On and Off.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
Setting the Sidetones Status
If transmit sidetones is disabled, DTMF sidetones
such as phone number and PTT ID sidetones are not
heard during transmission.
In SPM, rotate the Selector Knob (2) to the Set
Sidetones Status (
Use or to toggle between On and Off.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
54
NOTE
or ) menu.
or ) menu.
2-Year Warranty