Motorola AP 73 User Manual page 63

Special Programming Mode (SPM)
Setting the Alert Tone Volume
In SPM, rotate the Selector Knob (2) to the Alert
Tone Volume (
Use or to toggle between On and Off.
When is chosen, the alert tone volume fol-
lows the volume control setting (see "Adjusting
the Volume" on page 14).
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
Setting the Battery Saver Status
When enabled, the Battery Saver feature increases
the amount of time between battery replacement or
charging. Battery power is conserved by turning off the
receiver circuitry, except for periodic checks for carrier
activity.
In SPM, rotate the Selector Knob (2) to the Set
Battery Saver Status (
Normal, or
Use or to scroll through the three
options.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
2-Year Warranty
or ) menu.
NOTE
- Off, or
- Enhanced) menu.
-
55