Motorola AP 73 User Manual page 30

Additional Operations
Selecting A Transmit PL / DPL Squelch Code
There are 126 different Transmit PL / DPL codes avail-
able, numbered from 001 to 126 (see "Receive And
Transmit PL / DPL Code Tables" on page 23).
Transmit PL / DPL code '000' represents Carrier
squelch.
SQL
B
Press and hold
PL
xxx represents the active Receive PL / DPL code
number).
SQL
Press B momentarily to toggle the display to
PL
xxx (where xxx represents the active Transmit
PL / DPL code number).
Rotate the Selector Knob (2) to select the desired
active Transmit PL / DPL code.
Press the Toggle Light / Enter and Parameter
Transfer Button (4) (or any other button) momen-
tarily to adopt this Transmit PL / DPL code and
return to normal operating mode.
IMPORTANT
The radio automatically adopts the new Transmit PL
/ DPL code and returns to normal operation after 5
seconds of inactivity.
IMPORTANT
If the Receive PL / DPL code is programmed for
'000', then the Receive PL / DPL (coded squelch)
mode cannot be selected. To select, the Receive
code must be changed to any code besides '000'
(see "Selecting The Receive PL / DPL Squelch
Code" on page 21 and "Selecting A Transmit PL /
DPL Squelch Code" on page 22).
22
NOTE
until xxx is shown (where
2-Year Warranty