Integrated Peripherals - JETWAY N2PA-LITE User Manual

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing. The settings are: 2T and 2.5T.
System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in
better system performance. However, if any program writes to this memory area, a system
error may result. The settings are: Enabled and Disabled.
Video RAM Cacheable
Select Enabled allows caching of the video BIOS, resulting in better system performance.
However, if any program writes to this memory area, a system error may result. The settings
are: Enabled and Disabled.
Frame Buffer Size
You can choose the onboard VGA memory size shared from system memory. The settings are:
8M, 16M, 32M, 64M, Disabled.

3-7 Integrated Peripherals

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
> Onboard IDE Function
> Onboard Device Function
> Onboard Super IO Function
Init Display First
Power On Function
X KB Power On Password
X Hot Key Power On
Power Loss Function
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Onboard IDE Function
Please refer to section 3-7-1
Onboard Device Function
Please refer to section 3-7-2
Onboard Super IO Function
Please refer to section 3-7-3
Init Display First
This item selects to activate PCI Slot or AGP VGA first. The settings are: PCI Slot, AGP Slot.
Power Loss Function
This item allows the system to power ON/OFF automatically when power recovery again after
previous power loss. You can choose Auto to recover to pre-state, or always ON/OFF after power
recovery.
3-7-1 Onboard IDE Function
Integrated Peripherals
Press Enter
Press Enter
Press Enter
PCI Slot
Button Only
Enter
Ctrl+F1
Always off
F6:Optimized Defaults
25
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults