Miscellaneous Control - JETWAY N2PA-LITE User Manual

Amd athlon xp/athlon/duron processor m/b
Hide thumbs Also See for N2PA-LITE:
Table of Contents

Advertisement

3-11 Miscellaneous Control

This section provides options for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at next Boot is
CPU Ratio Select
Core_VDD Select
VDD_AUXC Select
VAGP Output
VRAM Output
VAUX Output
VTT Voltage
VAGP LUV Protect
VRAM LUV Protect
Dual3.3V LUV Protect
Flash Parts Write Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Host Clock at next Boot is
This item allows you to select CPU frequency at preset values.
The choices are: 100MHz, 133MHz, 166MHz, 200MHz, 236MHz, 240MHz, 242MHz, 244MHz,
245MHz, 250MHz
DRAM Clock at next Boot is
This field supports the capability of setting the memory modules clocks that you can use.
The choice is either 100MHz, 110MHz, 125MHz, 133MHz, 138MHz, 166MHz, 200MHz, 208MHz,
221MHz, 249MHz
CPU Ratio Select
This item allows you to select Ratio of the CPU. The choice are:X5~X24
VDD AUXC Select
This item allows you to select Chip Voltage. The choice are 1.6V(Default), 1.7V
VAGP Output
This item allows you to select 1.5V voltage of the AGP VGA card. The choice are: 1.5V, 1.6V,1.7V
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V~ 3.0V.
VAUX Output
This item allows you to select AUX voltage. The choice are: Default, 2%, 4%, 8%,12%, 16%.
VTT Voltage
This item allows you to select VTT voltage. The choice are: 1.25V, VDIMM/2.
VAGP/VRAM LUV Protect
This item allows you to enable the protective function on motherboard when over current presents.
The choice are: Enabled(Default), Disabled
Flash Parts Write Protect
This item allows you to protect BIOS against the data crash of virus. The choice are: Enabled,
Disabled. Before flash BIOS you have to change the setting to Disabled, otherwise you can not flash
BIOS.
Miscellaneous Control
100MHz
133MHz
Default
1.7V(Default)
1.6V(Default)
1.5V(Default)
2.6V(Default)
Default
1.25V
Enabled
Enabled
Disabled
Enabled
F6:Optimized Defaults
32
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults

Advertisement

Table of Contents
loading

This manual is also suitable for:

N2pap-lite

Table of Contents