Pc Health Status - JETWAY N2PA-LITE User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Shutdown Temperature
Show PC Health in Post
Current System Temperature
Current CPU Temperature
Current CPUFAN Speed
Current SYSFAN1 Speed
Current SYSFAN2 Speed
Vcore
Vcc3.3
+ 5V
+12V
-12V
VBAT(V)
5VSB(V)
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Shutdown Temperature
This item can let you set the Shutdown temperature. When CPU temperature is over this
setting, the system will automatically shutdown to protect CPU.
Show PC Health in Post
When Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN speed.
Detect CPUFAN in Post
When Enabled, system will send warning message if CPU fan is not functioning.
PC Health Status
Disabled
Enabled
25 ° C
38 ° C
5000 rpm
5000 rpm
5000 rpm
1.78V
3.31V
4.98V
12.22V
-12.36V
3.21V
5.02V
F6:Optimized Defaults
31
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults