Table of Contents
Advertisement
Introducing BIOS
The BIOS is a program stored in a flash memory on the motherboard. The program serves as a
bridge between motherboard and operating system. When you switch on the system, the BIOS
program gains immediate control. The BIOS first executes an auto-diagnostic test called
POST (power on self test) on all the necessary hardware. It detects the entire hardware devices
and configures the parameters of the hardware for synchronization. Only when these tasks are
completed it gives up control of the computer to operating system (OS). Since the BIOS is the
only communication channel for hardware and software, it is the key to ensure system stability
and optimal system performance.
You will see various options in the BIOS Setup main menu as shown in Figure 3-1. These
options will be explained step by step in the following pages. Before going further, let us first
take a short look at the descriptions of the function keys you may use here:
•
Press <Esc> to quit the BIOS Setup.
•
Press ↑ ↓ ← → (up, down, left, right) to choose, in the main menu, the option you want
to confirm or to modify.
•
Press <F10> to save these parameters and to exit the BIOS Setup menu when you have
completed the setup of BIOS parameters.
•
Press Page Up/Page Down or +/– keys when you want to modify the BIOS parameters
for an active option.
3-1 Entering Setup
Power on the computer and press <Del> immediately allows you to enter BIOS Setup.
If the POST message disappears before you press <Del> and you still wish to enter Setup,
restart the system to try again by turning it OFF then ON or pressing the "RESET" button on
the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt> and <Delete>
keys. If you do not press the keys at the correct time and the system does not boot, an error
message will be displayed and you will again be asked to
Press <F1> to continue, <Ctrl-Alt-Esc> or <Del> to enter Setup
3-2 Getting Help
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the
screen.
Status Page Setup Menu/Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the
possible selections for the highlighted item. To exit the Help window, press <Esc>.
Chapter 3
19
Advertisement
Table of Contents
