Table of Contents
Advertisement
2-5-4 AGP Slot
The motherboard provides an AGP Slot, supporting the 4X/8X AGP VGA card.
2-6 Connectors, Headers
2-6-1 Connectors
(1)
Power Connector (20-pin block) : PWR
ATX power supply connector. This is a newly defined 20-pins connector that usually
comes with ATX case. The ATX power supply allows the use of soft power on
momentary switch that connects from the front panel switch to 2-pins power-on jumper
pole on the motherboard. When the power switch on the back of the ATX power supply
is switched on, the full power will not come into the system board until the front panel
switch is momentarily pressed. Press this switch again will turn off the power to the
system board.
(2)
PS/2 Mouse & PS/2 Keyboard Connector: KYB
The connectors for PS/2 keyboard and PS/2 mouse.
(3)
USB Port connector: USB
The connectors are 4-pin connector that connect USB devices to the system board.
(4)
LAN Port connector: LAN (for N2PAP-LITE only)
This is a standard RJ45 connector for network connection
AG P SLO T
PIN
ROW2
1
3.3V
2
-12V
3
GND
4
Soft Power On
5
GND
6
GND
7
GND
8
-5V
9
+5V
10
+5V
Pin 1
12
ROW1
3.3V
3.3V
GND
5V
GND
5V
GND
Power OK
+5V (for Soft Logic)
+12V
Advertisement
Table of Contents
