Renaming A Zone Configuration; Replacing Zone Members - HP Brocade BladeSystem 4/12 User Manual

Renaming a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Right-click the name of the zone configuration you want to change in the Zone Configs list and
5. Type the new name for the zone configuration.
6. Press Enter to save the new name.
7.

Replacing zone members

A zone member can be replaced in a specific, selected zone, or, if it is the member of more than
one zone, it can be replaced in all the zones to which it belongs.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Right-click the zone member you want to replace in the Zones list and select one of the
DCFM Professional User Manual
53-1001773-01
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
select Rename.
For zone configuration name requirements and limitations, refer to
conventions" on page 442.
Depending on the characters included in the name you enter, a message may display
informing you the name contains characters that are not accepted by some switch vendors,
and asking whether you want to proceed. Click Yes to continue, or No to cancel the renaming
and consider your options.
Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
following options from the shortcut menu that displays:
•
Replace - To replace the zone member in a selected zone.
•
Replace All - To replace all instances of the selected zone member.
Zoning administration
"Zoning naming
15
477