HP Brocade BladeSystem 4/12 User Manual page 458

14
Viewing and editing switch encryption properties
FIGURE 176
•
•
•
•
•
•
•
•
426
Encryption Properties dialog box
Switch Properties table - the properties associated with the selected switch.
Name - the name of the selected switch.
Node WWN - the world wide name of the node.
Switch Status - the health status of the switch. Possible values are Healthy, Marginal, Down,
Unknown, Unmonitored, and Unreachable.
Switch Membership Status - the alert or informational message description which details the
health status of the switch. Possible values are Group Member, Leader-Member Comm, Error,
Discovering, and Not a member.
Encryption Group - the name of the encryption group to which the switch belongs.
Encryption Group Status - Possible values are:
-
OK - Converged - the group leader can communicate with all members.
-
Degraded - the group leader cannot communicate with one or more members.
-
Unknown - the group leader is in an unmanaged fabric.
NOTE
When a group is in the Degraded state, the following operations are not allowed: key vault
changes, master key operations, enable/disable encryption engines, Failback mode changes,
HA Cluster creation or addition (removal is allowed), and any configuration changes for storage
targets, hosts, and LUNs.
Fabric - the name of the fabric to which the switch belongs.
DCFM Professional User Manual
53-1001773-01