Server Port - HP Brocade BladeSystem 4/12 User Manual

3
Software Configuration

Server port

You can configure the server port settings so that you can assign a web server port number and set
the server port to be SSL-enabled.
Configuring the server port
To configure server settings, complete the following steps.
1. Select Server > Options.
FIGURE 43
2. Select Server Port in the Category list.
3. Select the Enable SSL check box to enable this function for the server port.
4. Enter a port number in the Web Server Port # field.
5. Enter a port number in the Starting Port # field.
96
The Options dialog box displays
Options dialog box (Server Port option)
NOTE
Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.
The server requires 13 consecutive free ports beginning with the starting port number.
(Figure 43).
DCFM Professional User Manual
53-1001773-01