Saving A Zone Database To A Switch - HP Brocade BladeSystem 4/12 User Manual

15
Zoning configuration
8. Select the Sync Scroll Enable check box to synchronize scrolling between the selected
9. Merge zone configurations by completing the followings steps.
10. Merge zones by completing the followings steps.
11. Merge aliases by completing the followings steps.
12. Merge all elements by clicking Merge All.
13. Add elements (aliases, zones, and zone configurations) to the editable database by completing
14. Remove elements from the editable zone database by selecting an available element (added)

Saving a zone database to a switch

1. Select Configure > Zoning > Fabric.
2. Select a zone database from the Zone DB list.
3. Select Save to Switch from the Zone DB Operation list.
4. Click Yes on the confirmation message.
5. Click OK to save your work and close the Zoning dialog box.
460
databases.
a. Select one or more zone configuration nodes from the Reference Zone DB area.
b. Select an element in the Editable Zone DB area.
c. Click Merge.
a. Select one or more zones from the Reference Zone DB area.
b. Select one zone from the Editable Zone DB area.
c. Click Merge.
a. Select one or more aliases from the Reference Zone DB area.
b. Select one alias from the Editable Zone DB area.
c. Click Merge.
the followings steps.
a. Select one or more of the same elements in the Reference Zone DB area.
b. Select the element type in the Editable Zone DB area.
c. Click Add.
from the Editable Zone DB are and clicking Remove.
Note that if a zone is removed from a zone configuration, it is removed only from that single
zone configuration. However, if the zone is removed from the list of zones, it is removed from
all zone configurations.
The Zoning dialog box displays.
The selected zone database is saved to the fabric without enabling a specific zone
configuration.
DCFM Professional User Manual
53-1001773-01