Exporting The Public Key Certificate Signing Request (Csr) From; Properties; Importing A Signed Public Key Certificate From Properties; Enabling The Encryption Engine State From Properties - HP Brocade BladeSystem 4/12 User Manual

14
Viewing and editing switch encryption properties
•
•
•
•

Exporting the public key certificate signing request (CSR) from

Properties

To export the CSR under Public Key Certificate Request, complete the following steps.
1. Click Export.
2. Browse to the location where you want to save the certificate.
3. Click Save.
4. Submit the CSR to a certificate authority (CA) for signing. CA signing requirements and

Importing a signed public key certificate from Properties

To import a signed public key certificate, complete the following steps.
1. Click Import.
2. Enter or browse to the file containing the signed certificate.
3. Click OK.

Enabling the encryption engine state from Properties

To enable the encryption engine, complete the following steps.
428
HA Cluster Name - the name of the HA cluster (for example, Cluster1), if in an HA configuration.
The name can have a maximum of 31 characters. Only letters, digits, and underscores are
allowed.
Media Type - the media type of the encryption engine. Possible values are Disk and Tape.
Re-Balance Recommended - A value of Yes or No indicating whether or not LUN re-balancing is
recommended for an encryption engine that is hosting both disk and tape LUNs.
System Card - the current status of system card information for the encryption engine.
(registered or not registered).
A Save dialog box displays.
Alternatively, you may also copy the CSR and paste it to a file.
procedures differ per key manager appliance. Refer to
appliances" on page 351 and look through the following sections to find the procedure that
applies.
The Import Signed Certificate dialog box displays.
The file is imported onto the switch.
"Supported encryption key manager
DCFM Professional User Manual
53-1001773-01