Generating Reports; Viewing Reports; Exporting Reports - HP Brocade BladeSystem 4/12 User Manual

10

Generating reports

Generating reports

To generate reports, complete the following steps.
1. Select Reports > Generate.
2. Select the types of reports you want to generate.
3. Select the fabrics for which you want to generate reports.
4. Click OK.
5. Click Close to close the View Reports dialog box.
6. Click Yes on the "are you sure you want to close" message.

Viewing reports

You can view any report generated in the SAN. To view reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
2. Select the report you want to view in the All Reports list.
3. Use the buttons in the table below to navigate through and resize the report.
4. Click Show in Browser to view the selected report in your default browser window.
5. Click Close to close the View Reports dialog box.
6. Click Yes on the "are you sure you want to close" message.

Exporting reports

To export reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
2. Select the report you want to export in the All Reports list.
226
The Generate Reports dialog box displays.
•
Fabric Ports
•
Fabric Summary
The generated reports display in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
The View Reports dialog box displays.
If you do not see the report you want to view, generate it first by following the instructions in
"Generating reports" on page 226.
You can select reports by Time, Report Type, or User.
The View Reports dialog box displays.
DCFM Professional User Manual
53-1001773-01