Assigning An Lldp Profile To A Port Or Ports In A Lag - HP Brocade BladeSystem 4/12 User Manual

13
LLDP-DCBX configuration

Assigning an LLDP profile to a port or ports in a LAG

You create LLDP profiles using the Edit Switch dialog box, which you access from the CEE
Configuration dialog box. Global configuration parameters, which is the default selection, are
displayed in the Assigned Profile table shown in
NOTE
When LLDP is disabled on the switch, a yellow banner displays on the LLDP-DCBX dialog box,
indicating that LLDP-DCBX is not only disabled on the switch, it is also disabled for all ports and LAGs
on the switch.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a port or link aggregation group (LAG), and click Edit.
3. Click the LLDP-DCBX tab on the Edit Port/Edit LAG dialog box.
FIGURE 117
4. Click Assign an LLDP profile to <port name> button to enable the feature.
5. Select an LLDP profile from the Available Profiles list.
320
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Assign an LLDP profile to <port name> dialog box displays.
Assign an LLDP profile dialog box
NOTE
Assign the Global Configuration is the default. The Available Profiles list is disabled if global
configuration is selected. In addition, the Assign an LLDP profile button is disabled if no LLDP
profiles exist on the switch.
Figure 117.
DCFM Professional User Manual
53-1001773-01