Configuring Brocade Hba Credentials - HP Brocade BladeSystem 4/12 User Manual

2
Host discovery
3. Enter a discovery request name (such as, MyFabric) in the Name field.
4. Select Hosts in Fabric from the list.
5. Select All fabrics or an individual fabric from the list.
6. Click Add.
7.
8. Click OK on the Add Host Discovery dialog box.
9. Click Close on the Discover Setup dialog box.

Configuring Brocade HBA credentials

To configure credentials for a Brocade HBA, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
3. Discover a host.
4. Click the Host Credentials tab.
46
All hosts which are part of a managed fabric and have a registered host name display in the
text box. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
Configure Host credentials, if necessary.
To configure host credentials, refer to
"Configuring virtual machine credentials"
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
To discover a host, refer to
"Importing Hosts from a CSV file"
FIGURE 25
Add Host Discovery dialog box - Host Credentials tab
"Configuring Brocade HBA credentials"
on page 47.
"Discovering Hosts by IP address or hostname"
on page 44, or "Importing Hosts from a Fabric"
on page 46 or
on page 43,
on page 45.
DCFM Professional User Manual
53-1001773-01