Filtering Port Connectivity - HP Brocade BladeSystem 4/12 User Manual

Filtering port connectivity

To filter results from the port connectivity view, complete the following steps.
1. Click the Filter link from the Port Connectivity View dialog box
FIGURE 66
2. Click a blank cell in the Field column to select the property from which to filter the results.
3. Click a blank cell in the Relation column to select an action operation.
4. Define a filter by entering a value that corresponds to the selected property in the Value
5. Repeat steps 2 through 4 as needed to define more filters.
6. Click OK.
DCFM Professional User Manual
53-1001773-01
The Filter dialog box displays
Filter dialog box
The following actions are available:
•
==
•
!=
•
<
•
>
•
<=
•
>=
•
contains
•
matches
column.
The Port Connectivity View dialog box displays. If filtering is already enabled, only those ports
that meet the filter requirements display. To enable the filter, select the Filter check box.
(Figure 66).
7
Ports
151