HP Brocade BladeSystem 4/12 User Manual page 50

1
Management server and client
4. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
5. Complete the following steps on the Server IP Configuration screen.
18
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you use an FTP Server which is not configured on the same machine as the Management
application, the Firmware Repository feature will not be available.
FIGURE 9
FTP Server screen
FIGURE 10
Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
If DNS is not configured for your network, do not select the 'hostname' option from either
the Server IP Configuration or Switch - Server IP Configuration Preferred Address list.
Selecting the 'hostname' option prevents clients and devices from communicating with
the Server.
DCFM Professional User Manual
53-1001773-01