Renaming A Zone Object - HP StoreFabric SN6500B Administrator's Manual

4. Enter yes at the prompt.
5. Use cfgShow to verify the deleted zone object is no longer present.
6. If you want the change preserved when the switch reboots, use cfgSave to save it to nonvolatile
7.

Renaming a zone object

Use the following procedure to rename a zone object:
1. Connect to the switch and log in using an account with admin permissions.
2. Use cfgShow to view the zone configuration objects you want to rename.
3. Use zoneObjectRename to rename zone configuration objects.
4. Enter the cfgShow command to verify the renamed zone object is present.
5. If you want the change preserved when the switch reboots, enter the cfgSave command to
6. Enter the cfgEnable command for the appropriate zone configuration to make the change
Fabric OS Administrator's Guide
53-1002745-02
You are about to expunge one configuration or member. This action could result
in removing many zoning configurations recursively. [Removing the last member
of a configuration removes the configuration.]
Do you want to expunge the member? (yes, y, no, n): [no] yes
(flash) memory.
Use cfgEnable for the appropriate zone configuration to make the change effective.
switch:admin> cfgShow
Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Purple_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
NOTE
Zone configuration names are case-sensitive, blank spaces are ignored, and the
zoneObjectRename command works in any Admin Domain except AD255.
switch:admin> zoneObjectRename "White_zone", "Purple_zone"
save it to nonvolatile (flash) memory.
effective.
Zone object maintenance
11
335