Editing A Lag - HP Brocade BladeSystem 4/12 User Manual

5. When you have finished configuring the policies, apply the settings to the CEE port.
6. Click OK when you have finished modifying the CEE port parameters.
7.
8. Click Start to apply the changes, or click Close to abort the operation.

Editing a LAG

Use the following procedure to change members and policies in a link aggregation group (LAG).
1. Select Configure > Switch > CEE from the menu bar.
2. Select the link aggregation group (LAG) from the Products/Ports table.
3. Click Edit.
FIGURE 111
4. Modify the following LAG parameters as required:
DCFM Professional User Manual
53-1001773-01
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog.
The CEE Confirmation and Status dialog box displays.
Review the changes carefully before you accept them.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Edit LAG dialog box displays.
Edit LAG dialog box
Link aggregation groups
13
301