Step
1.
Enter SFTP client view.
2.
Display a list of all commands or the help
information of an SFTP client command.
Terminating the connection with the SFTP server
Step
1.
Enter SFTP client view.
2.
Terminate the connection with
the SFTP server and return to
user view.
Setting the DSCP value for packets sent by the SFTP client
Step
1.
Enter system view.
2.
Set
the
packets sent by the SFTP
client.
NOTE:
This feature is available in Release 1203 and later versions.
Configuring the device as an SCP client
This section describes how to configure the device as an SCP client.
SCP client configuration task list
Task
Enabling/disabling first-time authentication
Transferring files with an SCP server
Command
For more information, see
"Establishing a connection to an
SFTP
•
•
•
Command
system-view
•
DSCP
value
for
•
Command
For more information, see
SFTP
server."
help [ all | command-name ]
server."
bye
exit
quit
Set the DSCP value for IPv4
packets sent by the SFTP client:
sftp client dscp dscp-value
Set the DSCP value for IPv6
packets sent by the SFTP client:
sftp client ipv6 dscp dscp-value
215
"Establishing a connection to an
Remarks
N/A
Use any of the commands.
These three commands function in
the same way.
Remarks
N/A
Optional.
By default, the DSCP value is 16 in
IPv4 packets sent by the SFTP client
and is 8 in IPv6 packets sent by the
SFTP client.
Remarks
Optional.
Required.