Super Authentication-Mode - HP FlexFabric 12900 series Command Reference Manual

Parameters
rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must exist in
the system. If you do not specify a user role, you obtain the default target user role.
Usage guidelines
The obtained user role is a temporary user role, because this command is effective only on the current
login. The next time you are logged in with the user account, the original user role settings take effect.
To enable users to obtain another user roles without reconnecting to the device, you must configure user
role authentication.
If no local password is configured in the local password authentication (local), an AUX user can
•
obtain the user role by either entering a string or not entering anything.
• If no local password is configured in the local-then-remote authentication (local scheme):
A VTY user performs remote authentication.
An AUX user can obtain user role authorization by either entering a string or not entering
anything.
Examples
# Obtain the user role network-operator.
<Sysname> super network-operator
Password:
User privilege role is network-operator, and only those commands can be used that authorized
to the role.
Related commands
authentication super (Security Command Reference)
•

super authentication-mode

•
super password
•
super authentication-mode
Use super authentication-mode to set an authentication mode for temporary user role authorization.
Use undo super authentication-mode to restore the default.
Syntax
super authentication-mode { local | scheme } *
undo super authentication-mode
Default
Local password authentication applies.
Views
System view
Predefined user roles
network-admin
Parameters
local: Enables local password authentication.
68